Mercedes-Benz CL-Class 2011 - Manual (Page 99)

G Warning!
Always ensure that no one can become
trapped or injured when the seat is moving. In
case potential danger exists, the procedure
can be interrupted by moving the seat
adjustment switch in the door control panel
or by moving the release lever again.
Folding the backrest forwards
In order to make it convenient for passengers
to get in and out of the rear compartment, the
driver's or front-passenger seat:
R is automatically moved forwards when the
backrest is folded forwards
R
is automatically moved backwards when
the backrest is folded back
X Pull seat release handle : in the direction
of the arrow and fold the backrest
forwards.
The head restraint is lowered and the seat
moves forwards.
Folding back the backrest
X Fold the seat backrest back until it
engages.
The seat moves to its original position. The
head restraint is raised. The seat backrest
is engaged again.
Adjusting the multicontour seat
You can adjust the multicontour seat using
COMAND (
Y page 238).
Adjusting the active multicontour
seat
You can adjust the active multicontour seat
using COMAND (
Y page 240).
i If PRE-SAFE ® has been activated, the air
pressure in the air chambers (the side
bolsters of the seat cushion and backrest)
of the multicontour seat or active
multicontour seat is increased.
Adjusting the lumbar support
You can adjust the lumbar support using
COMAND (
Y page 237).
Switching the seat heating on/off
Switching on/off
The three red indicator lamps in the button
indicate the heating level you have selected.
i If the battery voltage is too low, the seat
heating may switch off.
The system automatically switches down
from level
3 to level 2 after approximately
eight minutes.
The system automatically switches down
from level
2 to level 1 after approximately ten
minutes.
The system automatically switches off
approximately 20 minutes after it is set to
level
1.
Seats
97
Seats, steering wheel and mirrors
Z