Hazard warning flasher, Controls in detail – Mercedes-Benz GL-Class 2009 Owners Manual User Manual
Page 120
Lighting
118
High beam
X
Turn the exterior lamp switch to position
B
X
Switching on: Push the combination
switch in direction of arrow
1
.
The high-beam headlamp indicator lamp
A
in the instrument cluster comes on.
X
Switching off: Pull the combination switch
in direction of arrow
2
to its original
position.
High-beam flasher
X
Switching on: Pull the combination switch
briefly in direction of arrow
2
.
Turn signals
1
Turn signals, right
2
Turn signals, left
X
Press the combination switch in direction
of arrow
1
or
2
.
The corresponding turn signal indicator
lamp
L
or
K
in the instrument
cluster flashes.
The combination switch resets automatically
after major steering wheel movements.
i
To signal minor directional changes such
as changing lanes, press combination
switch only to point of resistance and
release. The corresponding turn signal
lamps will flash three times.
The hazard warning flasher can be switched
on at all times, even with the SmartKey
removed from the starter switch.
The hazard warning flasher comes on
automatically when an air bag deploys.
1
Hazard warning flasher switch
X
Switching on: Press hazard warning
flasher switch
1
.
All turn signal lamps are flashing.
i
With the hazard warning flasher activated
and the combination switch set for either
left or right turn, only the respective left or
Controls in detail