Controls in detail – Mercedes-Benz GL-Class 2009 Owners Manual User Manual

Page 132

Advertising
background image

Driving and parking

130

X

Make sure the KEYLESS-GO start/stop
button is inserted in the starter switch.

i

If you wish to start the engine with the

SmartKey instead of the KEYLESS-GO
function, remove the KEYLESS-GO start/
stop button from the starter switch and
proceed as described in “With
SmartKey” (

Y

page 129).

X

Depress the brake pedal during the starting
procedure.

X

Do not depress the accelerator pedal.

X

Gasoline engine: Press the KEYLESS-GO

start/stop button once.
The engine starts automatically.

X

Diesel engine: Press the KEYLESS-GO

start/stop button once.
The engine preglows and starts
automatically.

i

If the engine is at operating temperature,

the time the engine needs to preglow is
reduced.

Starting difficulties

!

Remember that extended starting

attempts can drain the battery.

The engine does not start. You can hear

the starter.
There could be a malfunction in the engine
electronics or in the fuel supply system.
Carry out the following steps:

X

If you are starting the engine with the
SmartKey: Turn the SmartKey in the starter
switch to position

0 and repeat the starting

procedure.

X

If you are starting the engine with KEYLESS-
GO: Close any doors that may be open to
allow for better detection of the SmartKey.

or

X

Remove the KEYLESS-GO start/stop
button from the starter switch.

X

Start the engine with the SmartKey as radio
signals from another source may be
interfering with the KEYLESS-GO function.

X

Repeat the starting procedure.

If the engine does not start after several
starting attempts:

X

Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.

The engine does not start. You cannot

hear the starter.
The battery may not be sufficiently charged.

X

Get a jump start (

Y

page 410).

If the engine will not start despite a jump
start:

X

Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.

The starter has been exposed to excessive
temperatures.

X

Let the starter cool for about two minutes.

X

Repeat the starting procedure.

If the engine does not start after several
starting attempts:

X

Contact an authorized Mercedes-Benz
Center or call Roadside Assistance.

Controls in detail

Advertising