Mode (usa only), Lighting, Only) – Mercedes-Benz GL-Class 2009 Owners Manual User Manual

Page 163: Controls in detail

Advertising
background image

Control system

161

Setting daytime running lamp mode (USA

only)

X

Move the selection marker with button

æ

or

ç

to the Lighting submenu.

X

Press button

j

or

k

repeatedly until

the message Lamp Circuit Headlamp
appears in the multifunction display.
The selection marker is on the current
setting.

X

Press button

æ

or

ç

to select

manual operation (Manual) or daytime
running lamp mode (Constant).

With daytime running lamp mode activated
and the exterior lamp switch in position

M

or

U

, the low-beam headlamps are

switched on when the engine is running.

In low ambient light conditions the following
lamps will come on additionally:

R

Parking lamps

R

Tail lamps

R

License plate lamps

R

Side marker lamps

For more information on the daytime running
lamp mode, see “Lighting” (

Y

page 116).

For safety reasons, changing the setting for
the daytime running lamp mode is not
possible while the vehicle is in motion.
The following message appears in the
multifunction display:

Settings can only be made at a

standstill.
For safety reasons, resetting all the functions
of all submenus to the factory settings while
driving (

Y

page 157) will not deactivate the

daytime running lamp mode.

Setting locator lighting
With the locator lighting feature activated, the
exterior lamp switch in position

U

and the

interior lighting in automatic mode
(

Y

page 120), the following lamps will come

on during darkness when the vehicle is

unlocked using button

k

on the

SmartKey:

R

Parking lamps

R

Tail lamps

R

License plate lamps

R

Side marker lamps

R

Front fog lamps

The locator lighting goes out when the driver’s
door is opened.
If you do not open the driver’s door after
unlocking the vehicle with the SmartKey, the
lamps will go out automatically after
approximately 40 seconds.

X

Move the selection marker with button

æ

or

ç

to the Lighting submenu.

X

Press button

j

or

k

repeatedly until

the message Surround Lighting

Function appears in the multifunction
display.
The selection marker is on the current
setting.

Controls in detail

Z

Advertising