System, see, Controls in detail – Mercedes-Benz GL-Class 2009 Owners Manual User Manual
Page 178
Driving systems
176
1
Setting current or higher speed
2
Setting current or lower speed
3
Deactivating the Distronic
4
Activating the Distronic or resuming to
the last set speed
You can activate the Distronic when the
vehicle speed is between 20 mph (30 km/h)
and 110 mph (180 km/h).
When the Distronic is activated, one or two
cruise control speed segments around the set
speed in the speedometer dial are
illuminated. The multifunction display will
show a message such as
DISTRONIC 55 MPH
(Canada: DISTRONIC 90 km/h).
After approximately 5 seconds the currently
set speed appears in the status indicator of
the multifunction display:
R
USA only: e.g. DTR 55 Miles
R
Canada only: e.g. DTR 90 km/h
If the Distronic is not activated after the
cruise control lever is pulled in direction of
arrow
4
message DISTRONIC Off in the
multifunction display.
In the following cases you cannot activate the
Distronic:
R
up to 2 minutes after starting the engine
R
when you brake
R
when you have engaged the parking brake
R
when the automatic transmission is in park
position
P, reverse gear R, or neutral
position
N
R
when the ESP
®
is switched off or has
switched off due to a malfunction
The vehicle speed displayed on the
speedometer can briefly vary from the speed
setting on the Distronic system.
X
Accelerate or decelerate to the desired
speed.
X
Briefly lift the cruise control lever in
direction of arrow
1
or depress in
direction of arrow
2
X
Remove your foot from the accelerator
pedal.
i
If you do not take your foot off of the
accelerator pedal and continue to
accelerate past the set speed, the following
message will appear in the multifunction
display:
DISTRONIC Override
The distance to a slower moving vehicle in
front of you will not be set. Your vehicle
speed will then be determined only by the
accelerator pedal position.
Keep in mind that it may take a brief
moment until the vehicle has made the
necessary adjustments.
Controls in detail