Mercedes-Benz GL-Class 2009 Owners Manual - Manual (Page 166)

Control system
164
X Move the selection marker with button
æ or ç to the Comfort submenu.
X Press button j or k repeatedly until
the message Easy-entry Function
appears in the multifunction display.
The selection marker is on the current
setting.
X Press button æ or ç to switch the
easy-entry feature On or Off.
Setting fold-in function for exterior rear
view mirrors
Use this function to set the exterior rear view
mirrors to be automatically folded in when
you lock your vehicle.
With this function set to On and the exterior
rear view mirrors folded in using the button
on the door control panel (
Y page 112), the
exterior rear view mirrors will not fold out
when you switch on the ignition. You will then
have to fold out the exterior rear view mirrors
using the button on the door control panel
(
Y page 112).
Make sure both exterior rear view mirrors are
folded out completely before driving off.
X Move the selection marker with button
æ or ç to the Comfort submenu.
X Press button j or k repeatedly until
the message Fold In Mirrors When
Locking appears in the multifunction
display.
The selection marker is on the current
setting.
X Press button æ or ç to switch
function On or Off.
Vehicle configuration menu
Use the Vehicle configuration menu to
activate/deactivate the Distance warning
function (
Y page 164) or to set the DSR
speed ( Y page 165).
Distance warning function
In vehicles equipped with Distronic, you can
determine whether the distance warning
function is to be enabled or disabled. With this
function set to On, the system will alert you
when recognizing a stationary obstacle or a
slower vehicle moving in your vehicle’s path
and the danger of a collision exists, even
when the Distronic is switched off.
X Press button è or · repeatedly until
the vehicle configuration menu appears
in the multifunction display.
X Press button j or k repeatedly until
the message Distance Warning appears
in the multifunction display.
The selection marker is on the current
setting.
Controls in detail