Attaching the presser foot shank – SINGER 1748 User Manual

Page 23

Advertising
background image

Raise the presser bar (a). Attach the presser foot shank (b) as

illustrated. (1)

Lower the presser foot shank (b) until the cut-out (c) is directly

above the pin (d). (2)
Raise the lever (e).
Lower the presser foot shank (b) and the presser foot (f) will

engage automatically.

Raise the presser foot. (3)
Raise the lever (e) and the foot disengages.

Attach the seam guide (g) in the slot as illustrated.
Adjust according to need for hems, pleats, etc. (4)

Turn power switch to off ("O") when carrying out any of the

above operations!

Attaching the presser foot

Removing the presser foot

Attaching the seam guide

Attention:

1

2

3

4

16

Attaching the presser foot shank

GB

a

c

d

e

f

b

b

a

e

g

Advertising