Blindstitch appliqué – SINGER 1748 User Manual

Page 83

Advertising
background image

GB

Blindstitch Appliqué

- Pattern: Blindhem
- Stitch Width: 1.5 (1/16 of an inch)
- Stitch Length: 2 - 3
- Foot: Standard Zigzag or optional Blindhem foot

Position appliqué piece on background fabric and secure it in

place using fabric glue.
Align needle so that it pierces background fabric along the

outside edge of the appliqué. Lower presser foot.
Using Blindhem stitch, proceed to sew, following the edge of

your appliqué. If using a Blindhem foot, align the lip of the blind

hem foot guide so that it sits directly under the edge of the

appliqué.
You may need to adjust the position of the guide to bring it

closer or further from the edge of the appliqué, by using the

thumbscrew located at the right of the foot.
To pivot for curves or corners, leave needle down in fabric on

outside edge of appliqué, lift foot and pivot.

Sewing Instructions:

76

Advertising