SINGER 1748 - Manual (Page 25)

1
2
3 4 5
6 7 8 9
18
Winding the bobbin GB
-Place thread and spool holder big or small spool pin. (1/2)
-Wind thread anticlockwise around bobbin winder tension discs
(3).
-Thread bobbin as illustrated and place on spindle (4).
-Push bobbin to right (5).
-Hold thread end (6).
-Step on foot control pedal (7).
-Cut thread (8).
-Press bobbin to left (9) and remove.
Please Note:
When the bobbin winder spindle is in "bobbin winding" position,
the machine will not sew and the hand wheel will not turn. To
start sewing, push the bobbin winder spindle to the left (sewing
position).