SINGER S18 - Manual (Page 11)

11
Step z
Place a bobbin in the bobbin case making sure the thread
winds clockwise on the bobbin as illustrated.
Step x
Draw the thread through the slit q in the bobbin case.
q Slit
Step c
Continue to pull the thread under the tension spring w
and through the opening e .
Pull out about 4˝ of thread.
The bobbin should spin clockwise when the thread is pulled
out of the bobbin case.
w Tension spring
e Opening
q
w
e
Inserting a Bobbin
q
w
e
Inserting the Bobbin Case into the Hook
Step z
Holding the latch q open, position the bobbin case into the
hook aligning the slot w with the notch e .
The bobbin case should lock into place when the latch is
released.
q Latch
w Slot
e Notch
Step x
Close the bobbin case cover r and attach the bobbin case
cover plate t in this order.
r Bobbin case cover
t Bobbin case cover plate
z
x
c
z
x
q
w
e
r
t