SINGER S18 - Manual (Page 18)

18
(1/4”)
(1/4”)
The machine will sew in reverse as long as the
reverse stitch lever is pressed.
Secure the beginning and end of a seam by sewing
in reverse for about 3/8”.
Pull the bobbin thread to bring the needle thread to
the wrong side of fabric.
Tie the threads together. Trim the remaining
threads.
Stop the machine a few stitches before the end of
the seam.
Press the up/down needle button to sink needle in
place.
Leave the needle down in the fabric and raise the
presser foot.
Pivot the fabric around the needle to change the
sewing direction.
Lower the presser foot and continue sewing.
Securing a Seam / Knotting the Threads
Pivoting a Corner
Securing a Seam / Reverse Stitching