SINGER S18 - Manual (Page 6)

6
Connecting Machine to Power Supply
i
w
q
t
y
r
e
u
q Machine power plug
w Machine socket for power supply plug
e Power supply plug
r Wall outlet
t Machine socket for foot control
y Foot control plug
u Foot control
Steps To Turning Machine Power
On
Turn off the power switch on the machine.
Insert the foot control plug
y into the
machine socket t .
Insert the machine plug q into the
machine socket w .
Insert the power supply plug e into the
wall outlet r .
Turn on the power switch i .
CAUTION
Always turn the power switch off and
unplug the sewing machine from the
electrical outlet when the machine is not
in use.
Operating Instructions:
The symbol "O" on a switch indicates the "off" position of a switch.
For appliances with a polarized plug (one blade wider than the other): To reduce the risk of electric shock, this plug is
intended to fit in a polarized outlet only one way. If it does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.
Speed Control Lever
Use the speed control lever to set the maximum
speed of the machine.
To increase sewing speed, slide it to the right.
To decrease sewing speed, slide it to the left.
Foot Control
Sewing speed is varied by the foot control and the
speed control lever. The heavier the foot presses
down on the controller the faster the machine runs.
The machine runs at the maximum speed set by the
speed control slider when the foot control is being
fully depressed.
Controlling Sewing Speed
GETTING READY TO SEW