SINGER S18 - Manual (Page 13)

13
z Lower the presser foot. Press the Up/Down needle
button twice to raise the needle to its highest
position. Turn the power switch off.
Push down the needle threader lever
q as far as it
will go.
Using the Built in Needle Threader
z
r
w
e
q
x
c
v
b
x Turn the lever q in the direction of the arrow to
insert the hook into the needle eye.
The hook
r comes out through the needle eye
as illustrated.
c Holding the thread with both hands, draw the
thread along the thread path w .
Then hook the thread around the guide e .
v Draw the thread under the hook r .
Hold the end of thread with your hand while pulling
up the thread lightly in the direction of arrow.
b Turn the lever in the direction of the arrow as
shown, drawing the thread loop t through the
needle.
Release the threader lever slowly. Then pull the
thread loop
t to the right.
t
Step
Step
Step
Step
Step