SINGER S18 - Manual (Page 14)

14
Step z
Hold the needle thread q lightly with your left
hand.
Step x
Hold upper needle thread and rotate handwheel one
complete revolution q . The upper thread will bring
up the loop through the needle plate w . When the
power is on the machine you can push the Up/Down
needle button twice to bring up bobbin thread.
Step c
Slide 4” of both threads to the rear under the presser
foot. You can use the external thread cutter on the
left side of machine. The cutter can be used to trim
threads to the proper length and to hold the threads
in place.
z
x
Bringing Up Bobbin Thread
q
q
w
c