Zippers and piping – SINGER 8280 Prélude User Manual
Page 57
Advertising
50
GB
Set the machine as illustrated.
Dial selector on " ".
The zipper foot can be attached right or left, depending on which
side of the foot you are going to sew. (1)
To sew past the zipper tab, lower the needle into the fabric, raise
the presser foot and push the zipper tab behind the presser foot.
Lower the foot and continue to sew.
It is also possible to sew a length of cord into a bias strip to form
a "welt" or piping.
Change to zipper foot.
Set stitch length control between "1" - "4" (according to thickness
of fabric).
(2)
Zippers and piping
1
2
0
1
2
3
4
Advertising
This manual is related to the following products: