Vintage Cellars Wine Guardian Water-Cooled Cooling System - Manual (Page 34)

31
Using Ductwork
Cold Air to/from Wine Cellar
√ Remove supply air grille or access door panels to install ductwork between the Wine
Guardian unit and the cellar.
√ Connect the supply air ductwork from the cellar to the supply air outlets at the Wine Guard-
ian unit.
√ Connect the return air ductwork from the cellar to the return air inlet at the Wine Guardian
unit.
Warm Air to/from Condenser
√ Connect ductwork on the condenser to direct heat and the air noise away from occupants.
√ Connect ductwork to another space within the basement, a building or to the outdoors if the
heat being exhausted is undesirable.