Vintage Cellars Wine Guardian Water-Cooled Cooling System - Manual (Page 6)

3
Receiving, Inspecting and Unpacking the
Wine Guardian Unit
Receiving and Inspecting the Unit
NOTE
Wine Guardian units are factory assembled and tested prior to shipment.
Wine Guardian units are shipped in individual cardboard boxes.
√ Lift at the designated handhold locations
only or fully support from underneath. A
shipment may include one or more boxes containing accessories.
√ Before opening the container, inspect the packing crates or boxes for obvious signs of
damage or mishandling.
√ Write any discrepancy or visual damage on the bill of lading before signing.
√ Inspect all equipment for any sign of damage caused during transit.
√ Report all visual or concealed damage to the carrier and file a claim immediately.
√ Thoroughly inspect the contents for any visible damage or loose parts.
IMPORTANT
If this procedure is not followed, the shipping company may reject the claim
and the consignee may suffer the loss. Do not return the shipment to the
factory.
Review the Packing Slip to Verify:
√ Model number
√ Factory installed options
√ Unit accessories
If any items listed on the packing slip do not match your order information, contact the place of
purchase immediately.
Check the unit for:
√ An electrical power cord
√ A thermostat wired into the terminal strip on the unit
√ A drain line coming out of the unit