Welch Allyn Spot Vital Signs LXi - User Manual - Manual (Page 32)

22 Controls, Display Window, and Connections Welch Allyn Spot Vital Signs LXi
The liquid crystal display (LCD) may indicate any of the following: systolic blood pressure
(mmHg or kPa), diastolic blood pressure (mmHg or kPa), MAP (mmHg or kPa),
temperature (
F or C), temperature mode, pulse rate, pulse signal level, SpO
2
percent,
department location, date, time, record number, height (in or cm), weight (lb or kg),
respiration rate, pain level, connectivity signal strength, and battery charge level.
Figure 4. Display Window
7 2 1
73
5 8 9
62
BP
4 WEST
AM
S S
TEMP
SpO2 PULSE /min
mmHg
mmHg
Reading
F
DIA
%
Enter
01
Patient ID 0 2 4
Weight
Respiration
Pain
Height
Send/Next Reading
Clear
Systolic and Diastolic
display: if MAP is turned on,
the screen toggles between
the systolic and diastolic
values, and the word “MAP”
and the MAP value.
SpO
2
display: shows the
percent saturation of arterial
hemoglobin. For devices with
SpO
2
only.
Pulse Signal Bar Graph: shows
the strength of the pulses detected.
Pulse display: shows the pulse
rate.
Temperature display and
indicator: shows the
temperature in Fahrenheit or
Celsius.
Thermometer probe setting
indicators: shows temperature
mode. For devices with SureTemp
Plus thermometer only.
Battery level indicator: shows
the battery charge level.
Reading number indicator:
shows what reading the device is
on. Spot LXi retains up to 50
readings in memory.
Clock: shows the current time.
Location identifier: shows
where the device belongs. If no
location is entered, this area
displays the date.
Navigation Window: shows
menu options, error
messages, or temperature
conversion.
Thermometer probe setting
indicators: shows Monitor
Mode. For devices with SureTemp
Plus thermometer only.
Connectivity indicator: shows the
status of Spot LXi sending a wireless
reading.
Reading sent: indicates a
successful wireless send reading
attempt.
Reading not sent: indicates an
unsuccessful wireless send reading
attempt. X
Out-of-range indicator: shows
the patient’s temperature reading
above or below the measurement
range limits. For devices with
SureTemp Plus thermometer only.
Clinician ID icons:
The figure icon signifies that Spot Vital Signs LXi
requires the clinician to enter the Clinician ID.
The check mark signifies Spot Vital Signs LXi has
recorded the Clinician ID.
For devices with a bar code scanner only.