Welch Allyn Spot Vital Signs LXi - User Manual - Manual (Page 53)

7
43
Manual Entries and External Device
Operation
Manual Entries
Weight, Height, Respiration, and Pain Level
Users can manually enter weight, height, respiration rate, and pain level parameters along
with the Spot LXi readings if the specific parameter is turned on in the Internal
Configuration Mode (see “Internal Configuration” on page 29). The default for each
manual parameter is on.
1. Press the Navigation buttons until the cursor is in front of the parameter in the
Navigation Window.
2. Press the Select button. The default parameter value appears and flashes above the
Navigation button.
3. Press the Navigation buttons to increase or decrease the value.
4. Press the Select button to accept the value. The Navigation Window returns to its
previous state with the accepted parameter value appearing next to the parameter
heading in the list.
If a parameter is entered incorrectly, repeat these steps to correct the value.
Body Mass Index
Body Mass Index (BMI) is calculated with weight and height entry. After you save the
reading, press the Memory button to view the BMI calculation as part of the entire
reading.
Memory Recall
The Memory button allows you to scroll through, print, or erase readings.
1. Press the Memory button. Spot Vital Signs LXi displays the previous
reading.
The Navigation Window displays the scroll, print, erase, and erase all options.
Scroll Allows the user to move up and down through the saved readings with the Navigation
button.
Print Sends the current reading to the printer (see “You must enable each external device in
the Internal Configuration Mode before using it (see Table 7 on page 32). Verify that
each device is attached on the back of Spot LXi as instructed in the Internal
Configuration Mode.” on page 44)
MEM