Welch Allyn Acuity and Mobile Acuity LT Central Monitoring Systems - User Manual - Manual (Page 146)

142 Chapter 9 Status icons Welch Allyn Acuity Central Monitoring System
Monitor
Communication Lost
Take priority
over low-level
alerts. Locations representing
problem monitors. [room #]
Loss of Comms If the disconnect is
intentional, click Confirm,
and then close the alert
window. Otherwise,
reestablish
communications between
the patient monitor and
the Acuity System.
Alert Tone Suspended
During
suspension
period, newly
occurring alerts
are indicated
only after
original alert is
corrected.
Acuity System
only visually
indicates newly
occurring
alarms by
changing the
Alert Tone
Suspended icon
from yellow to
red. Locations representing
monitors with suspended
audible alert tones. [room #] Equipment
or more specific
message Attend to problem. Then
click the Silence/Reset
key at the patient monitor
or Resume at the central
station Virtual Monitor.
Table 8. Icons and messages that represent patient and monitor status
Patient/monitor
status icon Icon display
priority Icon location on map Messages in
hallway message
panels and at top
of Acuity Central
Station screen Recommended action