Controls and indicators, Lcd display, Calibration set point temperature – Welch Allyn 9600 Plus Calibration Tester - User Manual User Manual
Page 11
Advertising
5
2
Controls and Indicators
LCD Display
Figure 1. LCD Display and Front Buttons
Calibration Set Point Temperature
There are three Calibration Set Point temperatures used to
test the calibration of the thermometer. The three
temperatures are 36° C (96.8° F), 38.5° C (101.3° F), and 41°
Current Cavity
Temperature
Temperature
Units
Calibration Set
Point Temperature
Set Point
Mode
Celsius/Fahrenheit
Selection Button
Temperature
Selection
Button
Advertising