Welch Allyn 1500 Patient Monitor v.1.3.X - User Manual User Manual
Page 113
Directions for use
Settings
109
Sub menu
Parameter
Description
System
(password
protected - see
previous page)
Height units
Select Inches (in) or centimeters (cm)- sets the monitor’s
measurement units.
Weight units
Select pounds (lbs) or kilograms (kg)- sets the monitor’s
measurement units. In neonate mode the units are
automatically switched to grams.
Acuity Enabled
Yes/No. Connects to Acuity. Note that Acuity can only be
enabled when Enable Acuity connection in the service setup is
set. This is not available in this release.
Set Date and Time
Entry of the year/month/day/hour/minute
Save User Defaults
With this function, values changed by the user can be saved
(see
Show Event Log
Display of the monitor event log (see
Service
This provides settings, options and service information for
service personnel only.
Factory
This menu is for factory use only.