Welch Allyn 1500 Patient Monitor v.1.3.X - User Manual - Manual (Page 18)

14 Introduction Welch Allyn 1500 Patient Monitor
Parameter Settings/Submenus
Administrator Configuration
Display of monitor ID, network settings, options, etc. This is for information
only.
Alarms
Alarm settings - silence time, suspend time, etc. This requires a password to
enter (see
“Settings” on page 101 ).
System
Time and date settings and unit preference (cm/in, kg/lb). This screen also
gives the option to save the current settings as the user default settings, and
the option to display the event log screen. This screen requires a password
to enter (see
“Settings” on page 101 ).
Communications, Service and Factory
These menu options are for service and factory personnel and can only be
accessed by password only. Details are given in the service handbook.
Close Exits the setup menu.
1. The full arrhythmia option is only viewable when the full arrhythmia option is installed.
2. The recorder option is only viewable when the printer is installed.
3. The parameter options will vary according to the monitor configuration and licensed options.
4. The 12-lead resting ECG option is only viewable when the resting ECG option is installed.
5. The hemodynamics calculations option is only viewable when the cardiac output option is installed.