Cardiac output drug calculator – Welch Allyn 1500 Patient Monitor v.1.3.X - User Manual User Manual
Page 131
Directions for use
Technical data
127
Cardiac output
Drug calculator
Module
Schiller
Amplifier
Fully isolated, defibrillation protected >5kV
Measuring method
Thermodilution
Sampling frequency
250 Hz
Measuring method
Thermodilution
Parameters:
Cardiac output
Injectate temperature
Catheter temperature
Measuring range
Cardiac output: 0 to 20 l/min
Injectate temperature: 0° to 40°C / 32° to 104°F
Catheter temperature: 33° to 40°C / 91.4° to 104°F
Resolution
Cardiac output: 0.01 l/min
Injectate temperature: 0.01°C / 0.018°F
Catheter temperature: 0.002°C / 0.018°F
Accuracy
Cardiac output: ± 5% at 0°C / 32°F (injectate temperature)
Measurement
Start is detected by temperature difference >0.05ºC at distal thermistor
Calculations
Setting of a dose, rate, amount, and volume for which any 3 set will cause
the 4th to be calculated.
Concentration mg/ml
Dose and rate
Titration table (dose and rate)