Welch Allyn 1500 Patient Monitor v.1.3.X - User Manual - Manual (Page 51)

Directions for use Monitoring and Measurements 47
12-lead resting ECG (option)
With this option it is possible to record a 12-lead resting ECG. One resting ECG can be
stored at a time. The resting ECG cannot be viewed on the monitor but can be printed on
the internal printer.
Taking a resting ECG
1. Press the Setup button .
2. Select 12-lead ECG.
3. Check electrode status. Ensure the green On is displayed for all electrodes - this
indicates that the electrode resistance is within acceptable range to obtain a valid
reading.
4. Select Start 12-lead Resting ECG. The message Rest ECG Analysis - in Progress is
displayed while the resting ECG is being taken. This is followed by Rest ECG -
Complete.
5. The resting ECG is saved in memory until a new patient is defined or the ECG is
overwritten with a new recording.
Note The 12-lead resting ECG is an option and only appears in the setup menu when
enabled.