Wine Guardian Through-the-Wall Wine Cellar Cooling Systems 50Hz (WG25) - Manual - Manual (Page 12)

11
the mode button on the control for five seconds. Once in the program menu, the user can scroll
through the setting by pressing the mode button and can adjust each setting by using the up and
down arrows. The programming mode allows the user to customize features such as °F or °C
temperature scale, high/low temperature and humidity alarm set points, an adjustable 0-10
minute compressor anti-short cycle delay, sensor averaging options, enable or disable the defrost
feature, an optional keypad lockout code, differential and dead band adjustments, room
temperature calibration, enable or disable the humidifier, and automatic or continuous fan option.
To exit the programming mode the user may either hold the mode button for 5 seconds, or the
control will automatically store the settings and exit the programming mode after 10 seconds of
inactivity. Each user interface control will also employ an ON/OFF button that turns the system
on or off respectively.