Wine Guardian Through-the-Wall Wine Cellar Cooling Systems 50Hz (WG25) - Manual - Manual (Page 55)

54
警报代码
Alarm Codes
高温警报 !
High temperature
alarm
“flashing”
按向上或向下键一次将警报转至显示正常温
度与湿度读数。闪动“温度”和
“!” 信息将在
屏幕上保留，直到温度低于高温警报触发点
为止（3号设定项）。
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing temperature
number” and “!” will remain on screen until
temperature falls below the High Temperature
Alarm setpoint (Setting 3).
低温警报 !
Low temperature alarm
“flashing” 按向上或向下键一次将警报转至显示正常温
度与湿度读数。闪动“温度”和
“!” 信息将在
屏幕上保留，直到温度高于低温警报触发点
为止（2号设定项）。
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing temperature
number” and “!” will remain on screen until
temperature rises above the Low Temperature
Alarm set point (Setting 2).
高湿警报 !
High humidity alarm
“flashing”
按向上或向下键一次将警报转至显示正常温度与湿
度读数。闪动“湿度”和
“!” 信息将在屏幕上保
留，直到湿度低于高湿警报触发点为止（5号设定
项）。
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing humidity number” and
“!” will remain on screen until humidity falls below
the High Humidity Alarm set point (Setting 5).
低湿警报 !
Low humidity alarm
”flashing”
按向上或向下键一次将警报转至显示正常温度与湿
度读数。闪动“湿度”和
“!” 信息将在屏幕上保
留，直到湿度升高于低湿度警报触发点为止（4号
设定项）。
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing humidity number” and
“!” will remain on screen until humidity rises above
the Low Humidity Alarm set point (Setting 4).
USER MANUAL ONLY