Wine Guardian Through-the-Wall Wine Cellar Cooling Systems 50Hz (WG25) - Manual - Manual (Page 56)

55
!1 高压故障
!1 = High Pressure
Switch Fault
!1 出现该警报时，系统将自动关闭。
THIS ALARM FORCES THE SYSTEM TO
SHUT DOWN
按向上或向下键一次将警报转至显示正常温
度与湿度读数。
This alarm forces the system to shut down
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication.
警报号 “！1” 信息将在屏幕上保留，直到用户重
置高压复位开关为止。请见第60页的“重置高压开
关”部分。
“!1” will remain on screen until the High Pressure reset
switch has been reset. See the trouble shooting guide
page 60 for “Instructions to Reset High Pressure
Switch”
!2 冷凝水开关故障
!2 = CS (Condensate
Switch Fault)
警报号 “！2” 信息将在屏幕上保留，直到
用户重置冷凝水复位开关和冷凝水问题解决
为止
“!2” will remain on screen until the CS
(condensate switch) fault is resolved and reset