Power supply – Canon FAX-L2000IP EN User Manual

Page 13

Advertising
background image

xiii

Do not install the machine in the following locations:
- A damp or dusty location
- A location near water faucets or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames

Power Supply

WARNING

Do not damage or modify the power cord. Also, do not place heavy objects on the power cord, or
pull on or excessively bend it, as this could cause electrical damage and result in a fire or electrical
shock.

Keep the power cord away from a heat source; failure to do this may cause the power cord coating
to melt, resulting in a fire or electrical shock.

Do not connect or disconnect the power cord with wet hands, as this may result in electrical shock.

Do not connect the power cord to a multiplug power strip, as this may cause a fire or electrical
shock.

Do not bundle up or tie the power cord in a knot, as this may result in a fire or electrical shock.

Insert the power plug completely into the power outlet, as failure to do so may result in a fire or
electrical shock.

Do not use power cords other than the power cord provided, as this may result in a fire or electrical
shock.

As a general rule, do not use extension cords. Using an extension cord may result in a fire or
electrical shock. If an extension cord must be used, however, use one rated for voltages of 220-240
V AC and over, untie the cord binding, and insert the power plug completely into the extension cord
outlet to ensure a firm connection between the power cord and the extension cord.

CAUTION

Do not use power supplies with voltages other than those specified herein, as this may result in a
fire or electrical shock.

Always grasp the power plug when disconnecting the power cord. Pulling on the power cord may
expose or snap the core wire, or otherwise damage the power cord. If the power cord is damaged,
this could cause current to leak, resulting in a fire or electrical shock.

Leave sufficient space around the power plug so that it can be unplugged easily. If objects are
placed around the power plug, you will be unable to unplug it in an emergency.

Advertising
This manual is related to the following products: