Canon FAX-L2000IP EN User Manual
Page 73
Setting Up Speed Dialing
3-17
3
Basi
c O
per
ation
s
NOTE
•
If the Network Kit (optional for the FAX-L2000) is installed on your machine, the following
display appears when you press
(OK). Press
(OK) again to start registration.
5
Press [
▼
] or [
▲
] until the one-touch speed dialing key’s number
that you want to register appears
➞
press [OK].
You can also specify a one-touch speed dialing key by closing the appropriate
one-touch speed dialing panel and pressing the one-touch speed dialing key
that you want to register.
NOTE
•
If a telephone number is already registered for the one-touch speed dialing key, that
number is displayed. If the key is registered for group dialing, <GROUP DIAL> appears
on the LCD display.
6
Press [
▼
] or [
▲
] until <1.TEL NUMBER ENTRY> appears
➞
press
[OK].
7
Enter the telephone number (up to 120 digits) using the numeric
keys
➞
press [OK].
To enter a space, press [Space]. Spaces are optional and ignored during
dialing.
The message <DATA ENTRY OK> appears on the LCD display for a few
seconds.
NOTE
•
To correct the entered number, press [ ] to move the cursor to the digit you want to
correct
➞
press [Delete]
➞
enter the correct number.
•
If you make a mistake, press
(Clear) to delete the number
➞
enter the correct
number.
1-TOUCH SPD DIAL
1.TEL# REGISTRATION
OK
OK
OK
TEL# REGISTRATION
10=
➞
TEL# REGISTRATION
1.TEL NUMBER ENTRY
OK
TEL# REGISTRATION
1.TEL NUMBER ENTRY
➞
TEL NUMBER ENTRY
TEL=
OK
4
1
7
5
2
8
6
3
9
0
TEL NUMBER ENTRY
TEL=123 4567
➞
TEL# REGISTRATION
2.NAME
▲
C