Canon FAX-L2000IP EN - Manual (Page 64)

Checking and Setting the Telephone Line 3-8
Basi
c O
pera
tion
s
3
5
Press [ ▼ ] or [ ▲ ] to select <TOUCH TONE> or <ROTARY PULSE>
➞ press [OK].
6
If you want to select the transmission speed, press [ ▼ ] or [ ▲ ]
until <3.TX START SPEED > appears ➞ press [OK].
NOTE
•
If your document transmissions are slow in starting, this may mean that the telephone
lines in your area are in poor condition. Select a slower speed. You can select
‘33600bps’, ‘14400bps’, ‘9600bps’, ‘7200bps’, ‘4800bps’, or ‘2400bps’.
7
Press [ ▼ ] or [ ▲ ] to select the desired transmission speed ➞
press [OK].
8
If you want to select the reception speed, press [ ▼ ] or [ ▲ ] until
<4.RX START SPEED> appears ➞ press [OK].
NOTE
•
If your document receptions are slow in starting, this may mean that the telephone lines
in your area are in poor condition. Select a slower speed. You can select ‘33600bps’,
‘14400bps’, ‘9600bps’, ‘7200bps’, ‘4800bps’, or ‘2400bps’.
9
Press (Stop) to return to the Standby mode.
OK
TEL LINE TYPE
ROTARY PULSE
➞
TEL LINE SETTINGS
3.TX START SPEED
OK
TEL LINE SETTINGS
3.TX START SPEED
➞
TX START SPEED
33600bps
OK
TX START SPEED
33600bps
➞
TEL LINE SETTINGS
4.RX START SPEED
OK
TEL LINE SETTINGS
4.RX START SPEED
➞
RX START SPEED
33600bps