Canon FAX-L2000IP EN - Manual (Page 48)

Setting a Document 2-2
Docu
men
ts a
nd Prin
t Me
dia
2
NOTE
•
The document guides on the document feeder tray can be adjusted to fit the width of nonstandard
size paper. For best results, all of the sheets in the stack should be of the same width.
•
Although the document guides on the document feeder tray indicate that 11" x 17" paper (279 mm)
can be placed in the document feeder tray, the effective scanning width is up to A4 paper (208 mm).
•
For documents that are larger or smaller than these recommended sizes, reduce or enlarge them on
a copy machine, then send the copy. (See Chapter 14, “Appendix”, in the Facsimile Guide.)
•
The machine does not scan completely to the edges of the paper, and anything beyond this
recommended margin is not scanned for sending. (See Chapter 14, “Appendix”, in the Facsimile
Guide.)
Setting the Document on the Machine
You can set a stack of up to 50 letter or A4 size pages into the document feeder for scanning.
1
Place your document face up in the document feeder tray.
If the document is too long for the document feeder tray, pull out the document
extension tray.
Extension Tray