Canon FAX-L2000IP EN - Manual (Page 79)

Using Speed Dialing 3-23
3
Basi
c O
per
ation
s
Coded Speed Dialing
Follow this procedure to start a transmission and send a document by pressing (Coded Dial)
followed by a three digit code.
IMPORTANT
•
To use this feature, you must first register a telephone number for coded speed dialing. (See “Coded
Speed Dialing”, on p. 3-18.)
1
Place your documents on the machine.
For instructions explaining how to place your documents, see “Setting the
Document on the Machine”, on p. 2-2.
NOTE
•
You can adjust the resolution, contrast, and document type for scanning. (See “Adjusting
the Scan Settings”, on p. 2-4.)
•
You can also specify a sender’s name with [TTI Selector]. (See Chapter 3, “Sending
Documents”, in the Facsimile Guide.)
2
Press (Coded Dial) ➞ enter the desired three digit code (000-
127) using the numeric keys.
After five seconds, the machine starts to send the document.
If you are using Direct Sending, you will see a series of brief, alternating
messages that tell you the machine is dialing, calling, then transmitting the
document. The number being dialed, name of the other party, and transaction
number of the document are also displayed.
DOCUMENT READY
4
1
7
5
2
8
6
3
9
0
TEL= 123 4567
012 CANON CANADA
TRANSMIT 0005
SCANNING P.001