Canon FAX-L2000IP EN - Manual (Page 76)

Setting Up Speed Dialing 3-20
Basi
c O
pera
tion
s
3
NOTE
•
To correct the entered number, press [ ] to move the cursor to the digit you want to
correct
➞ press [Delete] ➞ enter the correct number.
•
If you make a mistake, press (Clear) to delete the number ➞ enter the correct
number.
6
Press [ ▼ ] or [ ▲ ] until <2.NAME> appears ➞ press [OK].
7
Enter a name (up to 16 characters) using the numeric keys ➞
press [OK].
For more information on how to enter names, see “Entering Names for
Registration”, on p. 1-26.
The message <DATA ENTRY OK> appears on the LCD display for a few
seconds.
This completes the minimum settings for registering a coded speed dialing
code.
● To stop here and register another code:
❏ Press [Data Registration] ➞ repeat the procedure from step 3.
● To end the procedure and return to the Standby mode:
❏ Press (Stop).
NOTE
•
You can also perform the optional settings. For more information on how to specify the
settings, see Chapter 2, “Using Speed Dialing”, in the Facsimile Guide.
▲
C
OK
TEL# REGISTRATION
2.NAME
➞
:A
_
4
1
7
5
2
8
6
3
9
0
OK
:A
CANON CANADA
➞
TEL# REGISTRATION
3.OPTIONAL SETTING
Data
Registration