Canon FAX-L2000IP EN - Manual (Page 74)

Setting Up Speed Dialing 3-18
Basi
c O
pera
tion
s
3
8
Press [ ▼ ] or [ ▲ ] until <2.NAME> appears ➞ press [OK].
9
Enter a name (up to 16 characters) using the numeric keys ➞
press [OK].
For more information on how to enter names, see “Entering Names for
Registration”, on p. 1-26.
The message <DATA ENTRY OK> appears on the LCD display for a few
seconds.
This completes the minimum settings for registering a one-touch speed dialing
key.
● To stop here and register another key:
❏ Press [Data Registration] ➞ repeat the procedure from step 5.
● To end the procedure and return to the Standby mode:
❏ Press (Stop).
NOTE
•
You can also perform the optional settings. For more information on how to specify the
settings, see Chapter 2, “Using Speed Dialing”, in the Facsimile Guide.
Coded Speed Dialing
Follow this procedure to register a telephone number for coded speed dialing.
1
Open all three one-touch speed dialing panels ➞ press [Data
Registration] ➞ [ ▼ ] or [ ▲ ] until <4.ADD. REGISTRATION>
appears ➞ press [OK].
If necessary, see the steps 1 to 3 of “One-Touch Speed Dialing”, on p. 3-16.
OK
TEL# REGISTRATION
2.NAME
➞
:A
_
4
1
7
5
2
8
6
3
9
0
OK
:A
CANON U.S.A NY
➞
TEL# REGISTRATION
3.OPTIONAL SETTING
Data
Registration
OK
Data
Registration