Canon FAX-L2000IP EN - Manual (Page 65)

Sending Documents 3-9
3
Basi
c O
per
ation
s
Sending Documents
This section explains how to dial a number for faxing.
Using Regular Dialing
When you come to a step that requires dialing a number, you can dial the number with the keys
on the numeric keypad, just like you would when dialing a telephone number. This is called
“regular dialing”.
NOTE
•
To make dialing easier, register frequently used numbers to the one-touch speed dialing keys or
coded speed dialing codes. (See “Using Speed Dialing”, on p. 3-21.)
1
Place your documents on the machine.
For instructions explaining how to place your documents, see “Setting the
Document on the Machine”, on p. 2-2.
NOTE
•
You can adjust the resolution, contrast, and document type for scanning. (See “Adjusting
the Scan Settings”, on p. 2-4.)
•
You can also specify a sender’s name with [TTI Selector]. (See Chapter 3, “Sending
Documents”, in the Facsimile Guide.)
2
Dial the telephone number using the numeric keys.
NOTE
•
When entering a number using regular dialing, if you see that you have entered an
incorrect digit, press [Delete] to delete the rightmost digit
➞ enter the correct digit.
•
You can also use (Clear) to clear the entire telephone number ➞ start entering the
telephone number again.
•
If you notice that you made a mistake while the machine is dialing the number, press
(Stop) to return to the Standby mode ➞ start again.
DOCUMENT READY
4
1
7
5
2
8
6
3
9
0
C