Wilbur Curtis GEM3IF - Manual

1
IntelliFresh Function & Features
Important Safeguards/Symbols
This appliance is designed for commercial use. Any servicing other than cleaning and preventive mainte-
nance should be performed by an authorized Wilbur Curtis service technician.
• DO NOT immerse the unit in water or any other liquid
• To reduce the risk of fire or electric shock, DO NOT open service panels. No user serviceable parts
inside.
• Keep hands and other items away from hot surfaces of unit during operation.
• Never clean with scouring powders, bleach or harsh chemicals.
Symbols
WARNINGS – To help avoid personal injury
Important Notes/Cautions – from the factory
Sanitation Requirements
W
ilbur
C
urtis
C
ompany
, i
nC
.
Service Manual – Gemini IntelliFresh Satellite
Warmers
The warmers, will turn on
automatically whenever a cof-
fee brew cycle is started. The
temperature of the warmers
are controlled at the warmer
buttons on the control panel.
The G3 UCM is shown on
the left side and the G4 touch
screen UCM is on the right.
FOR THE LATEST SPECIFICATIONS AND INFORMATION GO TO WWW.WILBURCURTIS.COM
Model
GEM3IF
The IntelliFresh system will alert you when the coffee has exceeded the desired holding time. The Intellifresh system is activated by a connector on
the Satellite coming into contact with a corresponding connector on the center panel. IntelliFresh is adjustable through the UCM control panel on the
brewer.
Quality Timer (Factory Set to 2 hours)
Press ¤ to select, press < or > to choose desired setting. Range 20 min. to 240 min. The timer is intended to notify the user when the coffee loses
its freshness. The indicator light (LED) on the satellite will remain solid red until the Quality Timer expires (Factory Set to 2 hours). At expiration the
LED will flash and remain flashing at the factory setting for an additional 8 hours. The additional 8 hours is controlled by the Warmer Auto-Off setting.
• Setting Range: 20 – 240 minutes. The default time is 2 hours.
• Time Expiration Indicator: LED flashes after expiration of Quality Timer Setting for up to a total of 12 hours. The default time is 8 hours after
expiration of the Quality Timer.
Warmer Auto-Off (factory set to 10 Hrs.)
Press ¤ to select < or > to adjust from 1-12 hours. This feature
has higher priority than the Quality Timer. It shuts off the warm-
ers after a pre-determined time factory set at 10 hours starting
when the Brew Button is pushed. The Quality Timer does not
affect this function.
LG
MED
SM
LG
MED
SM
Ready to brew!
LOW MED HIGH
Error Codes:
1. Three long blinks & one short blink = heater error.
2. Three long blinks & two short blinks = sensor error
WARMERS