Storix Software SBAdmin Solaris System Recovery Guide - Manual (Page 32)

To use a network install server, the Server IP Address, Client IP Address and Network Device fields
must be filled in. If a gateway is required for the client to reach the install server, enter the gateway the
client must use in the Gateway Address field. Under Adapter Configuration, press F4 to list the devices
available on the system. The option to Apply Network Configuration to Restored System indicates
whether you wish to migrate the above client network settings to the restored system.
If you receive a message that no network devices are found, then you probably
need to
Load Additional Network Device Modules .
Press the F3 or ESC key to end and return to the
Change Installation Server or Device menu once you
have finished your selection. When you do so, the network will be configured according to the settings you
chose, and the new server will be displayed at the bottom of the screen. If the server has changed, any
previous device selection will be removed and you will be required to select a new installation device.
Select Remote Tape Device
If a network install server is selected and available (indicated by the Server at the bottom of the screen),
you may select to install from a backup in a tape drive attached to the remote server. Note that you may
select a remote server and device regardless of the type of boot media used. When selecting this option, a
list of tape devices on the server will be displayed and you may select a tape device from the list.
Once you have made your selection, the drive will be checked to ensure that it is available and the name of
the device will be displayed at the bottom of the screen, and you will be returned to the
Change Installation
Server or Device menu .
Select Remote Disk Backup
If a network install server is selected and available (indicated by the Server field at the bottom of the
screen), you may select to install from a disk file backup available on the server. Note that you may select
to install from a remote server and device regardless of the type of boot media used.
When selecting this option, a list of directory devices will be displayed. This list will only include those
directory devices that are configured for System Backups. Refer to
Configuring Backup Servers and
Devices for more information on configuring devices for system backups.
Storix System Backup Administrator 32 Version 8.2 Solaris System Recovery Guide