BendixKing KAP 140 User Manual

Page 35

Advertising
background image

KAP 140 AUTOPILOT SYSTEM

Single Axis Operation

27

Rev. 1
Apr/02

4. Heading Selector Knob -
ROTATE BUG to agree with the
FRONT COURSE inbound head-
ing.

Note Instruments: CDI needle to the
right. Intercept heading 45° to the left
of the back course.

5. If the Course Deviation Bar is
greater than 2 to 3 dots: the
autopilot will annunciate REV
ARM
; when the computed capture
point is reached the ARM annun-
ciator will go out and the selected
course will be automatically cap-
tured and tracked. If the D-Bar is
less than 2 to 3 dots: the HDG
mode will disengage upon select-
ing REV mode; the REV annunci-
ator will illuminate and the capture/
track sequence will automatically
begin.

Advertising