BendixKing KPA 900 System RDR-2000 - Manual (Page 28)

BENDIX/KING® KPA 900
Page 3-8
Revision 2
©Honeywell International Inc. Do not print without express permission of Honeywell.
Dec/2007
3.4.2.2 CHANGING ART 2100 PARAMETERS IN THE KPA 900
The options available for each parameter are listed as option buttons grouped in a frame
with the parameter name. To select a different option for the parameter, click on the
desired option. The selected option receives the black dot inside the circle which indicates
a successful selection. A line is added to the activity log to indicate the change and the
new value.
The purpose of the stabilization calibration status frame is to give information only. It
indicates that a stabilization calibration has or has not been performed on the ART. This
information is useful when there is any doubt that the result of the calibration procedure
was successfully stored in the CM 2000. Refer to Section 3.6.8 for the procedure to view
or change the calibration.
When the unit parameters are changed, only the displayed value changes. The CM 2000
is not updated. Thus, the data must still be written to the CM 2000.
3.4.3 UNIT TYPE
→ KRA 405B
The KPA 900 allows the user to specify optional characteristics for the KRA 405B Radar
Altimeter. Refer to Section 4.2 for a description of the parameter function.
3.4.3.1 KRA 405B PARAMETERS
The KRA 405B parameter frame is displayed by selecting the KRA 405B from the Unit
Type menu, loading a configuration file for a KRA 405B, or reading a CM 2000 that has
been programmed for a KRA 405B. Figure 3-5 shows the KRA 405B parameter frame with
the default values.