BendixKing KPA 900 System RDR-2000 - Manual (Page 32)

BENDIX/KING® KPA 900
Page 3-12
Revision 2
©Honeywell International Inc. Do not print without express permission of Honeywell.
Dec/2007
Figure 3-7 – File Load and File Save As Form
3.6.2.1 LOOK IN NAVIGATION
The Look In frame contains three fields: the Drive list, the Directory list, and the File list.
The navigation goes to the directory path of the KPA 900. If the configuration files are
stored in this location, it is not necessary to navigate further.
To select a different drive, click the expand arrow next to the drive designation and click
on the desired drive. The directory and file lists update for the root of the selected drive.
To select a directory at a lower level than is shown, click on the directory name. See
Section 3.6.2.2 to select a directory at a higher level. The file list updates for the selected
directory.
The file list only displays KPA 900 configuration files. These files have an .rdr extension.
If there are no files of this type, the file list is empty. Double click on a file name to transfer
the name to the File Name text box.
3.6.2.2 UP ONE LEVEL COMMAND BUTTON
The Up One Level command button has an icon with a folder and an upward arrow.
Choose this command to select and display the parent directory of the directory on
screen. The file list updates for the selected directory.