BendixKing KPA 900 System RDR-2000 - Manual (Page 33)

BENDIX/KING® KPA 900
Page 3-13
Revision 2
©Honeywell International Inc. Do not print without express permission of Honeywell.
Dec/2007
3.6.2.3 CREATE NEW DIRECTORY COMMAND BUTTON
The Create New directory command button has an icon with a folder. This command
creates a new directory to store the configuration file. The new directory is located in the
directory that is currently selected. Choose this command to open a text entry box. Type
the name for the new directory in the text entry box and click the OK command to create
the directory.
3.6.2.4 FILE NAME FIELD
The File Name field contains the name of the file to be loaded or saved. Type a name into
this field or double click on a name to select it from the file list. Do not use the .rdr
extension when saving the file.
3.6.2.5 CANCEL COMMAND BUTTON
The Cancel command button closes the File Load or File Save form without saving any
changes.
3.6.2.6 OK COMMAND BUTTON
The OK command button loads the file name into the KPA 900 or creates a configuration
file with the chosen file name. If the unit type is not selected before a file load, the KPA
900 makes the unit type selection based on the file contents.
NOTE: During a file load, the KPA 900 tests the file before the results are shown. The file
data is tested for valid characters, correct structure, line numbering, and data
boundaries. If the file is corrupted, the KPA 900 does not accept it. If there is a
failure, a message box is displayed with a description of the problem. It may be
possible to correct a corrupted file by opening it with a text editor and correcting
the message box complaint.
3.6.3 FILE
→ SAVE MENU OPTION
If a previously saved and named file is modified and it is not necessary to keep the original
file, select the File
→ Save Configuration Data menu option. This option replaces the
existing file with the new file and keeps the same file name. The KPA 900 requests
confirmation before the existing file is overwritten. Figure 3-8 shows the confirmation
message box. Select the Yes command to save the changed file. Select the No command
to save the file with a different name. When this option is selected, the message box
changes to the Save File As form. Select the Cancel command button to close the
message box without saving any changes.