Ram lost warning, Memory battery warning, Appendix b warning screens – BendixKing SKYMAP IIIC User Manual
Page 118: Appendix b ), Layed (refer to appendix b, Displayed (refer to appendix b )
WARNING
SCREENS
APPENDIX B WARNING SCREENS
RAM Lost Warning
Screen 51: RAM Lost Warning Screen
This screen is displayed after power-on if any of the RAM areas are found to be corrupted.
Key 1 invokes a RAM clear to be carried out on the failed area and the last known good
values to be reinstated. If the last known good values are also suspect, a full RAM clear of
the affected data will be carried out.
Memory Battery Warning
A
P
P
E
N
D
IC
E
S
Screen 52: Memory Battery Warning Screen
This Screen will appear if during initialisation the memory battery voltage is found to be
low. It can also appear at any time during operation if the internal battery falls below a pre-
determined limit.
By pressing Key 1 you can return to whichever Screen was showing before the low voltage
condition was detected. If this screen is displayed, you should have your memory
battery replaced by your Bendix/King dealer at the earliest possible opportunity.
Rev 9 Jul 2006
B-1
Skymap/Tracker IIIC Pilot's Guide