BendixKing SKYMAP IIIC - Manual (Page 39)

QUICK REFERENCE GUIDE
The desired information will be presented
dynamically as a bearing and distance
from your present position. Any
displayed item can be instantly navigated
to by pressing the DIRECT TO key.
Alternatively the MAP key can be used to
return the user to MAP mode.
QUIC
K REF
E
REN
C
E
SETUP MAP FUNCTIONS
When you receive the unit, it will be pre-programmed with default values for colour,
language, map orientation etc. however it is possible to fully customise the map display for
your specific operating requirements and taste.
The initial screen is reached by pressing
SET UP in MAIN MENU, followed by
MAP SETUP. The subsequent screens
are reached by pressing the NEXT key.
On the initial page, each of the displayed features can be set using the joystick. The
features are as follows:
ORIENTATION: Set either in Track Up or North Up.
AIRPORT NAME: Labels airports in MAP mode either with ICAO code, airport or city
names.
MAP UNITS: Sets all map units to ether nautical miles, statute miles or kilometres. If
miles are selected, all lengths and altitudes will be reported in feet. If kilometres are
selected, all lengths and altitudes will be reported in metres.
COORD SYSTEM: Determines whether the unit operates with reference to Lat/Long, UTM
or OSGB.
DISPLAY: Sets orientation of the display into one of four configurations.
LANGUAGE: Sets language to English, French, German or Spanish.
MIN R/W LENGTH: Sets the minimum length of runway required for ten nearest airports.
Rev 9 Jul 2006 2-10 Skymap/Tracker IIIC Pilot's Guide