BendixKing SKYMAP IIIC - Manual (Page 90)

DETAILED OPERATION
DEMO MODE
To allow you to practice all aspects of navigation on the ground and to become familiar
with handling it, your unit can be used as a simulator by selecting its fully functioning
Demo Mode. Using this mode you can also replay your logged flight data.
Screen 20: Demo Mode Setup Screen
This Demo Mode Screen can be accessed by pressing Key 3, DEMO MODE, on Screen 1,
Title Screen, provided that, since the time you switched it on, your Skymap IIIC has not
received valid satellite information from its internal GPS receiver, or your Tracker IIIC
similarly lacks fix data from its external position source.
D
E
T
A
IL
E
D
O
P
E
R
A
T
IO
N
When you enter Demo Mode you will find a cursor over the word LAT. You can then use
the joystick to set up the latitude and longitude for any point from which you want the demo
to start. (The default latitude and longitude will be the co-ordinates of your last fix
position.) Alternatively you can press Key 3 and select a start point from the built-in
database. You can also set the airspeed at which you want to fly the demo to anything
between 000 and 999 Knots.
Once you have set your position and speed, if you press Key 5 you will find Screen 38,
Map Mode, displayed and you are ready to start Demo Mode. All map Screens that you
access whilst Demo Mode is switched on will, for safety reasons, have a DEMO MODE
warning box displayed to ensure you do not use them while in the air.
Rev 9 Jul 2006 3-47 Skymap/Tracker IIIC Pilot's Guide