BendixKing SKYMAP IIIC - Manual (Page 34)

QUICK REFERENCE GUIDE
Manual DIRECT TO And Data Interrogation
Provided the pointer is not active in MAP mode, press the DIRECT TO key. You will now
be able to select the item from the database as explained in Database Selection in this
section of the manual.
To activate the item as the DIRECT TO,
press the SELECT key when the desired
item is displayed. To get more
information on the item press the MORE
INFO key when the desired item is
displayed.
If you are running a DIRECT TO, you can
discontinue the navigation by pressing
the DIRECT TO OFF key.
Q
U
IC
K
R
E
F
E
R
E
N
C
E
USER WAYPOINTS
Editing/Creating A User Waypoint Manually
From MAIN MENU select the FLIGHT PLAN key, followed by USER WPTS. Use the
joystick to select the desired user waypoint number or name. Then press the EDIT key and
use the joystick to edit the NAME, LAT and LONG fields.
The entire user waypoint can be
deleted by pressing CLEAR WPT. If
you only wish to delete data in a
particular field, as opposed to the entire
user waypoint, move the cursor over
the field label (i.e. NAME, LAT, LONG)
and press the CLEAR key. To save a
user waypoint press SAVE & EXIT.
Use the ABORT key to return to MAIN
MENU without saving. The MARKER
key configures the user waypoint as a
special type of waypoint with an
associated alarm. Marker waypoints are
discussed in detail in the Flight
Planning section of this manual.
Editing/Creating A User Waypoint Visually
From MAIN MENU select the FLIGHT PLAN key, followed by USER WPTS. You may
then use the joystick to select a specific user waypoint (either by number or name). Press
the VIEW MAP key and the following screen will be shown with the previously selected
user waypoint in the centre of the screen. If the previously selected user waypoint was
empty your last position will be displayed.
Rev 9 Jul 2006 2-5 Skymap/Tracker IIIC Pilot's Guide