BendixKing SKYMAP IIIC - Manual (Page 68)

DETAILED OPERATION
Airways Flight Planning
An airways route can automatically be entered into a flight plan by selecting AIRWAYS
from Screen 13 Database Selection screen.
To enter an airways route move the cursor to the AIRWAY field and enter the airway
number using the joystick. Next enter the waypoint at which you plan to join the airway and
the waypoint at which you wish to leave the airway. The software will only allow you to
enter waypoints that are on the airway that you have selected.
D
E
T
A
IL
E
D
O
P
E
R
A
T
IO
N
Screen 17: Airway Selection Screen
Pressing Key 1 PREV PAGE will return to Screen 12 Flight Plan Program/Edit Screen,
whilst pressing Key 2 ENTER will automatically insert all the waypoints between the select
entry and exit points (including the selected entry and exit points) into the flight plan.
If you plan to change airways at a specific waypoint, select AIRWAYS again from screen
13, and enter the new airway designator using the joystick. This time however, set the
entry point as being the first waypoint on the new airway AFTER the point at which you
join it. This is to avoid having a duplicate waypoint at the changeover.
Rev 9 Jul 2006 3-25 Skymap/Tracker IIIC Pilot's Guide