Data interfaces, 1 data interfaces overview, Chapter 4. data interfaces – CANOGA PERKINS 2240 Fiber Optic Modem User Manual
Page 41: Data interfaces overview, Chapter 4 data interfaces
41
Chapter 4
Data Interfaces
4.1 Data Interfaces Overview
A variety of interfaces is available for the 2240 Modem:
Each interface conforms to existing standards. For applicable standards and physical connector
types, See Chapter 7, "Specifications". Refer to section 7.5 for a list of available interface
options.
In general, all interface modules are configured as Data Communications Equipment (DCE). All
devices supports a variety of control leads and auxiliary channels. The 2240 provides these
signals as end-to-end paths. See each respective section for a general description of interface
features. Figure 4-1 shows the interchangeability of interfaces.
Figure 4-1 Interchangeable Interfaces
Table 4-1. Interfaces
RS-423/232
CCITT V.35
RS-449/422
Transparent T1/E1
RS-449/RS-423 (MC1)
CCITT V.35/RS-423 (MC2)
RS-530
Programmable RS-530
TwinAx 422
TTL/BNC
Twinaxial Mil-Std 188-114C
DC-37 Mil-Std 188-114