CANOGA PERKINS 2240 Fiber Optic Modem - Manual (Page 95)

Chapter 7 Specifications
2240 Fiber Optic Modem Configurations
95
7.5 2240 Fiber Optic Modem Configurations
S = Standalone
R = Rack mount
Power Options
0 - N/A
1 - 115V-AC wall plug
2 - 115/230V in-line
Crystal Options
00 - No crystal
The 2240 Fiber Optic Modem provides most standard clock rates with built in
oscillators. If a non-standard internal clock rate is required, refer to
Section 3.3, or call Canoga Perkins and ask for Applications Support.
Fiber Options Multimode (Standard)
01 - 850nm LED ST
11 - 1310nm laser ST
16 - 1310nm LP laser ST
Single Mode (Standard)
11 - 1310nm laser ST
16 - 1310nm LP laser ST
Interface Options
432 - EIA 423/EIA 232/DB-25 with Control
422 - EIA 422/DC-37 with Control
430 - EIA 530/DB-25
436 - V.35/MRC-34 with Control
4B1 - 1.544/2.048 T1/E1 DA-15
4B2 - 1.544/2.048 T1/E1/term strip
4B3 - 1.544/2.048 T1/E1/BNC
-BN - TTL/BNC
-TW - 422/Twinax
TW8 - MIL 118-114A/Twinax
T22 - 422/5 conn Twinax
T88 - MIL 188-114A/5 conn Twinax
D88 - MIL 188-114A/DC-37
* MC1 - Multi-channel; (1) EIA 449 (DC-37), EIA 423 (DB-25)
* MC2 - Multi-channel; (1) V.35 (MRC-34), EIA 423 (DB-25)
** P53 - Programmable 8-bit buffered interface, EIA 530/DB-25
4PB - Redundant paddle board
000 - No interface
* Includes adapter, EIA 423 to EIA 366 ACE, male to female, DB-25 and
adapter, EIA 423 to EIA 366 DTE, male to female, DB-25.
** Consult factory before ordering to confirm configuration.
NOTE: RS prefix designations have been changed to EIA. The EIA 232 and
RS-232 are the same part number.
2240-S-XXX-XX-XX-X
2240-R-XXX-XX-XX-0