CANOGA PERKINS 9145E Standard NID Software Version 1.0 - Manual (Page 24)

9145E NID Software User’s Manual System Configuration
IP/SNMP Agent Configuration
14
3.1.3.1 Adding/Editing a Managing Host IP
To add a Managing Host IP, select Add (A) from the Host Access Menu. To edit an existing Managing Host
IP select Edit (E). To delete a Managing Host IP select Delete (D). The Edit Host Access menu (Figure 3-6)
opens.
Figure 3-6 Add Host Access Menu
1. Enter the Managing Host IP address to add to the Host Access list and press Enter.
2. Enter the IP Mask Size (default value 32). To have an entire subnet access the 9145E, enter the
mask size for the subnet.
3. Select a Telnet access value. Choices for Telnet access are: Telnet and SSH, Telnet Only, SSH
Only, or None.
4. Cycle through the FTP Access parameters FTP and SFTP, FTP Only, SFTP Only, or None using
the Space Bar. Press Enter to select the parameter.
5. Cycle through the SNMP Access parameters Read, Write, or None using the Space Bar. Press
Enter to select the parameter.
6. Cycle through the SNMP Protocol parameters V1/V2c/V3, V1/V2c, or V3 using the Space Bar.
Press Enter to select the parameter.
7. Type in the desired V1/V2c Read Community and press Enter.
8. Type in the desired V1/V2c Write Community and press Enter.
9. Use Space to scroll through the V1/V2c Access Levels (Operator, Supervisor, or Observer). Press
Enter to select desired setting.
10. Press Esc to return to the Host Access Table menu.
Canoga Perkins Corp. Ethernet Network Interface Device 29-JAN-2009
Model 9145E-101-3-0 V01.00 F121 11:51:16
----------------------------------EDIT HOST ACCESS-----------------------------
Managing Host IP :
IP Mask Size :
1. Telnet Access :
2. FTP Access :
3. SNMP Access :
4. SNMP Protocol :
5. V1/V2c Read Community :
6. V1/V2c Write Community :
7. V1/V2c Access Level :
Enter Managing Host IP address
------------------------------------Messages-----------------------------------